Questions & Answers for: Yamaha rear sprocket

Question about 2005 DT 125 X

1 Answer

...rear sprocket on a stock dtr 250. The prior owner may have mounted a larger counter sprocket and / or a smaller rear sprocket on the bike. The drive ratio may be out of range such that the engine is ...

Ad

Question about 2008 Gladiator

1 Answer

which sprocket had the problem. A front sprocket will cost around $30 and a rear sprocket will cost around $60. Installation will also cost unless you do it yourself. Please rate this solution. Thanks

Ad

rear sprocket. A screw driver, impact possibly depending on how tight the screws are, and a 10mm socket. there is a locking plate that will need tapping out of the way, a plate that goes between the 2

...rear sprocket,pull on one of the chain links.Pull it away from the sprocket.If you can lift it away from the sprocket about 1/2 a sprocket tooth,both chain and sprockets need replacing.Just keep this ...

...sprocket rear for fj1100cc i need to know is smaller sprocket rear for fj 100cc better low rev? and tell me how many tooths sprocket ? two or three lesstooth ? Smaller sprockets will only give you ...

rear sprocket down a tooth help ? Find out what the tooth count on the rear sprocket was from the factory and see if you have a smaller sprocket than stock. THIS WILL BE FOR A FASTER TOP END. a larger

Question about 2002 TT-R 225

2 Answers

...rear sprocket on the 225 is concave/offset 13mm  the TT230 is straight.  I had to change my front sprocket to a 420 to use the rear TT225 rear wheel.  So it will work but you have to ...

Question about 2009 yBR125

1 Answer

...rear sprocket and use the proper size chain to match. They sell them in sets. It's quite possible only your chain may need to be changed . Inspect the sprockets!  If you haven't done so, ...

rear sprocket torque specs for a 2015 Yamaha FJ-09 changing chain and sprockets on my Yamaha 2015 FJ-09 and would like to know the torque specs for the rear sprocket and the counter shaft sprocket nut

...sprocket on , Now with the rear brake held on use a socket and breaker bar to undo the nut , Now with the nut loose you need to rase the rear of the bike use the centre stand and loosen the axle nut ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...