Questions & Answers for: Jeep rear hatch will not open

Rear Hatch Window The computer thinks that the rear hatch window is open when it's not. My alarm goes off randomly and my rear wiper won't work because it thinks that the window is open. And of course

...rear hatch panel from the inside, then you will have access to the linkage in the door and operate it manualy. If the rear hatch does not operate with the remote(if it has power door locks) you might ...

rear hatch door will not open i can here the solonoid working -can not get the key to go into the key hole so i can not get it to unlock manualy-is there a way i can get to thr inereds of the hatch ...

rear hatch will not stay open when weather is cold, temps below 45 affect the vacuum on the rear hatch. works fine in warm weather Those little shocks are gas charged, thus pressure increases in hot, ...

...hatch will not open YOUR LOCKING MECHANIZIM IS BAD. YOU CAN BUY THE PART AT THE JEEP DEALER FOR AROUND $50.00.THEN JUST PULL YOUR PANEL OFF THE REAR HATCH, AND REPLACE THE UNIT. HOPE THIS HELPS

...bolts to each hinge thats where it comes off depending on if its power you will need to unplug the harness and that is ran under the head liner not much involved in changing a rear hatch good ...

...rear hatch will not lock on my 2002 jeep liberty the rear hatch will not lock at all. I can flip the switch inside of the hatch by removing the 5 X 5 panel and reaching my hand inside. After doing ...

...rear hatch will not open on my 1998 jeep grand cherokee Your Grand Cherokee has a small pop off panel on the inside of the rear hatch trim...after carefully removing this panel reach inside the ...

Rear Hatch will not open, need diagram to inspect/fix Rear hatch will not open manually with key, or with master electronic lock release switch on front left door switch panel? The diagram I have ...

...rear hatch will not open on my 1994 jeep grand cherokee limited. How do i get it to open? Fairly common problem. First try shooting WD-40 into the opening in the handle then flipping the handle ...