...camber caster shim pack that can be added. The rear control arms are not adjustable from the factory. Someone thought they could adjust the proper camber of the tire based on the weight of the ...
...rear wheel toe's out at top how do i make the adjustment. 1985 corvette There are shims that can be moved but unless thaqt car never went outside the will be probley frozen.Is it the toe that is off ...
rear axle fix or replace Depends on your means and time. If you know someone or are handy yourself, find one at a local salvage yard. It would probably be easier to replace rather than to take it to a
Camber - Measurement in degrees. Front: 0 (range -1 to 1) Rear: 0.33 (range -1.33 to 0.67) Caster - Measurement in degrees. 1.17 (range 0.17 to 2.17) Toe-In - Measurement in inches (mm). Front: -0 (0)
rear camber is out(the wheels tip in at the top) The coil spring will also cause this,if the back end is lower than the front ,bet on the springs.Easy way to tell,,just jack the vehicle up by the
Question about 2000 Silhouette
...from the factory. They sell shims for about $20 that go behind the brake drum and this will correct your rear camber and toe so it will be within spec. These shims are adjustable and work
Question about 1996 Grand Am
...rear camber kit (dual angle shim)" I want to know if anyone knows anything about them, from what I've read seems to mainly be used for lowered vehicles, like the Scion xB 2008-2018-5(xB2) performance ...
Question about 1996 Grand Am
camber is ~-1.5 on each side. Rear does not seem to sag. Air pump and system seems to work. Is this "normal"? Readings messed up? Should be a concern? Possible caused by the accident and I get try and
. I saw a post in here with a Renaultsport parts list that included rear toe & camber shims. However the part number doesn't come up when searching Renault's part database. Anyone know how to get them
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions