Questions & Answers for: Ford Mustang rear bearings

bearings in the Specifications portion of this section. CAUTION: Align the index marks. CAUTION: Install the driveshaft with new bolts. If new bolts are not available, apply Threadlock and Sealer EOAZ

I have a Ford Mustang GT 2003 that has a bad roaring sound in the rearend. What might be the problem? have your rear brakes checked and your diferential fluid it might also be a rear bearing hope this

have and 2003 Mustan Cobra. I was hearing a squealing noise wich seemed like it was coming from the rear end. I took it to a shop called Griffin Brothers. They drove and said that my u joints were bad

...rear axle,checked and found that there is about an 1/8 slide in the axle. checked the ring and pinion and it seems find.any suggestions It likely has a pitted bearing. Recommend pulling out the ...

...sound when traveling in my 2000 Ford Mustang (6cyl) especially when on gas pedal. Is it tires, rear end, or what? most likely a wheel bearing, that the most common problem we see on this model, ...

bearings on rear as well as axel on right side. when going into right hand curve sound stops but soon as i straighten out it starts again. Its probably the left side, not only because you replaced the

how can i change the right rear wheel bearing on a 96 v-6 3.8 mustang Never known of a rear wheel drive having "wheel bearings?" If so, they would be inside the drum.

rear axel bearings, how to replace The axel eaings are squeeling. I need to replace them. Are there any special tools required, and how do I do the job? If you haven't done it before I would let a

how do I change rear axle bearings on 1994 mustang ? Remove the axles, bearings have to be pressed off and back on with the new. Have someone with a press do it for you.

Right rear wheel bearing on 1986 Mustang GT bearing race unable to remove race. Aparently a previous owner changed the bearing with a non factory bearing race and it doesn't have a lip to grab with a ...