Questions & Answers for: how to read code

...SP CODE: 79383392 CP CODE: 22663979 SIM CODE: 80971148 HOW TO: 1. INSERT ACCEPTED SIMCARD AND TAPE 2945#*71001# 2. GO TO MENU>SETTINGS>SECURITY>SIMLOCK AND USE CODE. LG KS360 READ CODES:

...SP CODE: 79383392 CP CODE: 22663979 SIM CODE: 80971148 HOW TO: 1. INSERT ACCEPTED SIMCARD AND TAPE 2945#*71001# 2. GO TO MENU>SETTINGS>SECURITY>SIMLOCK AND USE CODE. LG KS360 READ CODES:

...code read which will also turn off the code or take it to a repair shop that will read the code and tell you what needs to be done to fix it. Most shops charge to read the code I belive that AMMCO ...

...code in the tcm otherwise transmission problem such as speed sen or input out sensors for trans or just to tell you to check transmission codes for this your scanner cant read you might have to go to ...

rEAd) Code came up as (rEAd) I have no idead what that code means or where to find out what it means When i see that on my scanner it means to hit the `enter' button and it will read the codes out

...code reading 1997 Venture the ABS light is on dash had it Checked no codes reading comes up on testers Not all OBD-2 scanners are created equal.  Most only read power-train (engine/transmission) ...

...read some saying that for a code reader the engine light needs to be on but for scanners does not a code reader is just that it reads codes a scanner will read codes and will read readyness status of ...

code reader is used to read the codes and reset the codes once read. This web site will help you troubleshoot the codes http://www.obd-codes.com/trouble_codes . The reader can be purchased for usually

...read bar code If it will not read any bar codes, then it must be repaired. If it only reads selective bar codes, then perhaps the one you are trying to scan may not be of the type it recognizes. This ...

...read the codes, you will have to plug a scan tool or code reader into the 16-pin OBD II diagnostic connector, which is usually located under the dash near the steering column. The tool will then ...