Questions & Answers for: rca wiring

...front right and 2 front left speaker connection points? One set is a hard wire the other is an rca jack. Does it matter which one I use hard wire rca jack? what do you mean by one set is a hard ...

...am canect true cable but only two speaker is working Philips DVP 3256 has 6 outputs which takes in RCA connectors Altec lansing VS3251 has 3 STEREO outputs. Buy 3 nos of STEREO (female) to RCA

How Do I Wire An Amp To A Factory Stereo Without Rca Jacks Describe your How Do I Wire An Amp To A FHow Do I Wire An Amp To A Factory Stereo Without Rca Jacksactory Stereo Without Rca Jacks and ...

...u may have to rig it a little bit all u need is sound coming from the stereo and if u will take the rca one end and cut it and strip it u have a wire inside each one and then u have ground wires ...

i have an old kenwood kac-801. it doesn't have rca i have an old kenwood kac-801. It doesn't have rca outputs. i have an output adapter but the wire colors are different. i need the scematics or ...

I have to connect the RCA PLUG on a Center Speaker by Audio Research to the Center Speaker connections on my Sony Receiver, which requires two wires. What do I use... a RCA plug with ...? Thanks ...

...antenna Do not use for Amp Turn on! Use the Blue/White Wire for Amp,EQ, Ect.. turn on wire only RCA Connectors if applicable: Black RCA Harness: White RCA = Rear Audio Left Sub Output 1 Red RCA = ...

wiring of the turntable RCA plug ( RCA wire will have 4 connections like red and its outer wire then White and its outer wire.). connect these as follows. For right channel Red wire from the turntable

...red blue yellow black wires I have yellow blue red and black how to hook those up? If you're using RCA connections, connect the centre wire to the audio and video leads (white and yellow wires), and ...

...up a amp to my subs in a 2004 lincoln navagator Guessing its the factory deck and it does not have rca outputs behind the deck .You get an adapter from speaker wires to rca with the gain setting on ...