Questions & Answers for: Onkyo rapid heat

Question about TX-SR674S 7.1 Channel Up-Converting A/V Receiver Amplifier

2 Answers

...mormal (feeding from the cable box through the recevier). It start out with a slow blink becomes rapid and then stops and funtions normally. This happens when turning on the system and does not ...

Ad

Question about TX-SR601 Receiver

1 Answer

Onkyo TX-SV525 on and off I have had this Onkyo TX-SV525 home theater system since new, recently the system when turned on, would turn on and off repeatedly by itself. I shielded the front of the ...

Ad

Onkyo receiver (HT-R430) cutting out after a few seconds The receiver turns off about 3 seconds after turning it on. I hear 2 "clicks" (like relays) when I turn it on, and the display lights up, then ...

Question about 630-Watt 7.1 Channel Home Theater Speaker

1 Answer

GETTINF OVER HEAT HEAT SINK GETTING HOT ON ONKIO MODEL TX-DS939 POWER SUPPLY Onkyos are notorious for running a bit warm - though if yours is excessively warm, double-check the impedance of, and ...

Question about TX-DS575 Receiver

1 Answer

I have had this receiver for 14 years. It has never over heated. recently, it will quit working. After shutting power off for a while, it will work again. Is this the fan? No - it's a cold solder ...

Question about TX-DS484 Receiver

1 Answer

assinging coaxial 1 to dvd hi. Do the following to assign COAXIAL 1 to dvd. 1. Press the DVD button on frond panel ( will display the current setting). 2. Press and hold DVD button for 3 seconds ( ...

Question about TX-SR573 Receiver

1 Answer

I have an Onkyo TX-SR573 that gets hot enough to fry an egg. With no load and the receiver just plunged in and on it gets very hot. At one time it was part of a whole house audio system through an ...

Question about HTR500 Receiver

1 Answer

We are considering purchasing the Onkyo NR 509 but have been told that there are major heat issues. Since it will be inside an enclosed cabinet, we have some concerns. Is this an issue we should be ...

Question about TX-NR636 Receiver 7.2 Channels, 95 W/Channel, 0.08% THD, Supports 6 Devices

1 Answer

...to put the receiver in "Pairing/Connecting" mode. You should see a red and blue light flashing in rapid succession somewhere on the receiver. 2. Turn on Bluetooth on the device you want to connect ...

...or the heat sink clogged or has come dislodged from the power device(s), it can cause an overheat

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Onkyo Audio Player and Recorder Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

John
John

Level 2 Expert

510 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...