Questions & Answers for: raise teeth sewing machine

Ad

...teeth do not raise as soon as the button is raised. They won't come up until the machine makes a revolution, you will hear a click and then when the needle comes up the teeth come up. If they don't, ...

Ad

Question about LS-2125 Mechanical Sewing Machine

1 Answer

...not pulling the fabric through. If the teeth have dropped and you do not have a drop feed lever you will need to get into the bottom of the machine and raise the teeth slightly and tighten the

Ad

Question about 11101 Mechanical Sewing Machine

1 Answer

how to raise and lower feed dogs If you do not have a button or lever near the teeth under the plate then you should have a raised plate

Question about 15516 Mechanical Sewing Machine

1 Answer

raise the teeth to the machine Your manual will tell you where your lever is to raise the feeddog, remember to move your handwheel towards you, never away from you when you want to raise the feeddogs.

...teeth will raise themselves next time you do regular sewing with a clunking noise - not really loud, but you can hear it. The feed teeth on my Des.1 are on the far right-hand side too so I think that ...

...Teeth do not raise, to low how do I raise them so macine will grab fabric Here is a link to page 22 of the manual. It shows you where to flip the lever to raise the feed dogs. If your feed dogs are ...

...teeth have dropped and I don't know how to raise them. Look in your owner's manual. I'm sure your machine has a reverse feed button but don't know if you can manually disable the feed teeth. ...

...teeth won't raise back up after sewing buttons Cleaned and turned machine on and off. It usually re-raises the feed teeth. The Sapphire will not raise the feed untill it makes one or two stitches ...

...wish to raise the feed teeth. The feed teeth will raise as you begin to sew. Look at #12 on page 2 here: ...

...2037 sewing machine and it works but the feed teeth lever is broken. I can't lower and raise the feed teeth. Any suggestions? It must be replaced; meanwhile you can use a flat wood stick to lift

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Chris Wetmore

Level 2 Expert

188 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...