a kit at radio shack for $20.00 and plus the $36.00 for the kit, and a lot of patience, my TV is well and running now, it was better than the $600.00 estimate I got from a local repair shop. Good luck
...I bought the soldering tool at radio shack for $20.00 it came in a kit as well. that was it, so like I said the TV is well and running now, it's great to finally get to see out of it, good
Question about WD-52525 52" Rear Projection HDTV
...radio shack for $20.00 and plusthe $36.00 for the kit, and a lot of patience, my TV is well andrunning now, it was better than the $600.00 estimate I got from a localrepair shop. Good luck! I saw you ...
radio shack so I used 1000uF 35V 85C. Put it back together and still the same thing. Should I replace the 1000uF 35V with the original 1000uF 16v 105c or use 690F 16V 105C that I have read in a couple
Question about WD-62725 62" Rear Projection HDTV-Ready Television
...Radio shack for appx. $2/each. http://www.jeremyburns.com/Mitsubishi-Green-Blinking-Light-Fix.pdf Good luck! i have a mitsubishi tv model # WS55859 and the green on light just blinks and it will not ...
Question about WD-62725 62" Rear Projection HDTV-Ready Television
...Radio Shack to see if I can get some with a smaller foot print but same specs. However the (2) 2200uf 10v caps had the puffy top look, and they were replaced with (2) 2200uf 16v caps. I put the TV ...
Question about WD-52525 52" Rear Projection HDTV
Where can I find parts for my mitsubishi tv best buys, staples, radio shack, an electronics store.
parts for mitsubishi WD52725 DLP TV parts where to get repair parts?? Hello i link the part check this website.. hope it work's http://www.discount-merchant.com/SearchResults.asp?Search=WD-52725 ...
Question about WD-52725 52". Rear Projection HDTV
... and there are three (3) of them. They are 119 mm X 20.5 mm, and have 40 positions, 0.5 mm thickness. Any help would be greatly appreciated! try radio shack. if not try to contact Mitsubishi TV ...
Question about WD-52725 52". Rear Projection HDTV
...tv to power on because the timer light blinks continuously. changed the light The 1000uf 16v capacitors on the dm board are probably bad. There are 4 of them. They are about $1.75 each at radio
Usually answered in minutes!
1,423 Questions
661 Questions
252 Questions
240 Questions
221 Questions