Questions & Answers for: Cobra radio receiver

cobra pr250 2 way radios both don't receive any signals from each other Hi, Pls verify that both radios are: 1. within range of each other; 2. channel selection is identical; 3. CTCSS Privacy Code is ...

...a mic with a broken wire in cord, if its the wire for receive, then when the key is released the radio will not go into receive mode. The switch in the mic determines weather the radio is in ...

I have a 148 gtl.. when you tx, there is a loud high pitched tone at the receiving end(receiving radio)...and it is garbled...tried switching radios and when I tx the 148, the other radio had the same

Can't hear incoming It may be speaker. Try another external speaker in back of radio. If thats not it, try turning up Rf gain knob. Go inside turn up receive on radio. Change Mics. Mic/Receive wires ...

...Microphone not wired correctly 2.  External speaker jack shorted 3.  Bad audio chip (if radio transmits audio not bad)4.  Audio circuit problem of some typeThe Microphone is most ...

148 gtl receive works fine transmit has no power radio has had no mods. all works well on receive. With another radio on the bench the failing radio can be heard but just has no power to the signal on

radio will not send radio will receive voice transmission but will not send voice transmission. It is possible your Code for transmit is different than your Code for receive. Cobra makes so many ...

stuck on rx mode Radio seems to be stuck on RX mode. Not Sure what RX mean, but that is what displayed on the radio. Receives transmission, but can't send. Please help.... Thanks Rx is an abbreviation

...cobra 29ltd will transmit but want receive three things you need to check the mic must be plug into radio, make sure that the radio is set to cb not pa,check your rf gain is turned all the way up and ...

...noise or speaker like its muted, but can hear weather ok shows receiving and ant ok Since the radio cannot transmit on Weather bands, there is no need for the radio to detect if it is ...