Questions & Answers for: radio power problems Cars & Trucks

...the radio from the power, find a way to reset it or, disconnect and reconnect the fuse the radio is on. I had this problem - it is because power went out to your radio- you need a code from a

...power wire at the radio. If the fuse is good pull the radio and check the red/yellow wire for power in, if you have power in , then suspect a bad radio. My next step would be to remove the radio and ...

...radio no power Saab 2002 9-5 Saab radio no power I had this problem on my 2003 9-5 linear wagon. There are several fuses that could be blown. There are 3 fuses in the panel near the driver door that ...

radio to power it up. e.g. a battery charger on 4-6 amps is a good way to get power to the system. NEVER power the computer with an outside power source, as the amps will destroy it. The problem COULD

...power to the radio.Or there is power to the radio but nothing is getting started on radio/stereo unit. Also is it after market radio unit or is a factory installed company radio.In some cases its ...

...power radio problem...if your radio light up but does not play, it could be your antennae is not plugged in to the back of your radio.  If you have to remove the radio, there are many good radio ...

Radio power (head end power) 2: dial light (goes to car park dimmer) 3: some have a memory wire, if not connected all programming will be lost. this must go to HOT ALL TIMES line. 4: electric antenna,

power button...I have checked not only the radio fuse in trunk but all fuses in trunk and under hood ONLY to find ALL FUSES are good. Please help, has anyone had this problem with radio and what fixed

...radio has 2 power feeds, one is wired to battery so it has power all the time for memory and the other power feed is from the ignition circuit so when you turn the ignition on it turns the radio on. ...

...power wire at the radio. If the fuse is good pull the radio and check the red/yellow wire for power in, if you have power in , then suspect a bad radio.My next step would be to remove the radio and ...