P0420 2003 Jeep Grand Cherokee 4.0 6cyl First had error showing missfire in cyl 2 6 tech foud wiring harness puncture to yellow wire going to injectors repaired changed plugs , coil pack OK. Running ...
...manual, if you have ever driven anything, there is pretty limited info in them, but still a good "quick reference" for simple stuff. I HAD BEEN HAVING PROBLEMS ENGAGING MY 4 WHEEL DRIVE AND IT WAS
...So off and walking to the Partsource I went, picked up a new cap and rotor, plugs and some quick start. Changed the plugs cap and rotor, tried to start but no go. I removed a plug, again i ...
...Only get ignition when key is turning back from START to RUN. Have to turn it a couple times in quick succession to get the engine to crank. After that, all is good until next time i go to start ...
Question about 2000 Cherokee
...don't work Last night, for no apparent reason, both the turn signals and the 4-way hazzard lights quick working on my son's 2000 Jeep Cherokee Sport. I understand that both systems have a flasher, ...
...roll key on and off 3 times if it is obd1 it will start flashing first code will be 1 flash then 2 quick flashes this is code 12 thta means computer is reading codes then just start counting flashes ...
any help??? thanks rob Could be several different things causing this problem. If you want to try a quick fix (this sometimes works) get behind the switch (you should also be able to access the vacuum
The 1996 jeep cherokee sport has been running fine. The last couple of days if I start it and drive for a bit turn it off and then come back out to start it...it wont start....I leave it for a bit and
...be made with the dipstick). Once the fluid level is in the crosshatch are your done. Take it for a quick drive and then recheck the fluid level. Top off as
Usually answered in minutes!
1,380 Questions
1,162 Questions
698 Questions
672 Questions
659 Questions