Questions & Answers for: Hyundai quick coupling

It will be in mill volts. You need to check power at coil and also going to cam sensor. Did it die quick or ? Check these then I'll get back

I have a 2004 hyundai sante fe - hesitates at 40-43 mph I have a 2004 hyundai sante fe - when it gets to 40 mph up to 43 44 mph it feels like it is hesitating like if I am driving a stick and dont ...

...before. dear friend:the coupling your referring to is a quick coupler and has two buttons on the side that needs to be pressed together,this coupler has a o ring on the inside that can be

I hit the reset button by the odo and all it does is change to A or B and no reset to O. I want to reset to O. Thanks!!! check in your owners manual in the glove box it will explain how to do this. On

...the car. In some makes and models they are mounted to the front and others they are on the back. A quick inspection of the area should answer that relatively quick. Remove those bolts and use a ...

...A SENSOR problem that needs to be diagnosed well that could take up to a couple of hours or be as quick as scanning the vehicle with a code reader Hi There are mant sensors on a feul injected ...

...but the car did start. I have not been driving the car for several weeks for anything more than a quick run to the grocery store about a half mile away. I am a single mom on a ridiculously tight ...

breaks hard First check the fluid level in the resevoir, and then make sure to bleed the air off the brakes. Most current models have self adjusting brakes, too. Try reversing quickly and slamming on ...

...within a year. Replacing the starter isn't too hard, depending on your mechanical skill level. The quick sequence is; disconnect the battery. Remove electrical connections from starter. Remove ...

Replaced battery now there is zero juice Was having issues with battery going dead, car would start after being on charger. So I bought new battery, put new battery in & replaced fuse that's on ...