Questions & Answers for: Frigidaire quick coupling

dirty water backs up into unit my dishwasher washes and drains fine, but when left sitting for a couple of days, dirty water backs up into it. I have tried cutting off the fresh water supply and ...

...LOOKS FOUL. Frigidaire FRS26KW3AW you need to go to lowes and get whats called a double ended quick connect,cut a little piece of tubing off and take it with you,push tubing in on both ends,now ...

My Affinity front load washer does not spin out and drain at the end of the cyle. Hi, There are a couple of reasons for the washing machine not to spin. Since the reason is not specific we need to to ...

Will not spin and drain at the end of the cycle. I can hear a click and hum like a contactor pulling in but the drum doesn't spin Hi, There are a couple of reasons for the washing machine not to spin.

...two things. (1) The noise could be cause by a broken or defective shock. (2) Worn drum bearings. A quick search on the web can net you the shocks quite inexspnsively. If you are handy the bearings ...

It smells like fish... We had this for only a couple months of last season, it was great, but I turned it on this year (after the long michigan winter) and it smells like fish, I quickly clesaned the ...

...I can not get it off demo mode. What do I need to do? Hi from retired Englishman in SW France, Quick couple of options as I have not the direct answer- 1) immediately contact the vendor and 2) ...

When the condenser kicks on it will makes a buzzing/whing sound for the time it is on. When the condenser kicks off the sounds stops. It kicks on and off every couple of minutes. : Hi! A relay starts ...

Why is my frigidaire dryer quitting after running a few minutes. It runs fine on the no heat so the motor is alright. I open the door and it is hot inside the dryer. Not neccessarily the cool cycle ...

...freely in both directions. I hear a click then motor kicks in for a split second and you hear a quick squeal, tub turns a couple inches and stops. I replaced the motor control board but still not ...