...back of my watch to change the battery. I don't see any screws. The plastic wrist band doesn't have to be cut away. You need to dislodge the spring-loaded end of the pin from the hole in the plastic ...
...put the watch face down on the wash cloth, drink the beer because your frickin thumbs are tired from trying to press the back on, line up the back noting that some watch backs have a cutout for the ...
...fine. I can't get the case plate to snap back on. What's the trick? Please help! Watch shops use a press to put backs on. Some will snap on using your thumbs, other need the press to apply more
...put it back on, this is what I did to my sister's watch cover when I could not snap it back. I took my cushy 1/4 inch mousepad to a vise. You may not have a vise. If you don't, stop reading now and ...
...applying pressure on the front and back of watch to pop it on. WARNING: this is very dangerous for your watch. DO NOT apply pressure to the crystal, try to put the pressure on the stell lugs
both thumbs around the lid and press and twist to the right and it should open.This lid should close tight after you put the battery or the water will get into the watch and damage the watch mechanism
watch It could require several tools. If it is a screw down back you will need a case-back opener (sold at Harbor Freight for $2.99). It is adjustable to fit most case backs. Make sure the wrench fits
Question about CY2060 Sport Series Watch
Snap back in the back plate after replacing battery - with equal strong pressure on sides of watch. Tried many posirions - won't click on firmly. Some of these watches have a notch where the stem goes
Question about 107sssbd Steel Ladies Watch
...watch face down in a towel or something to protect the face next make sure the notch for the stem is aligned (if it has one) apply presure to the center of the back this should be done on a desk or ...
Usually answered in minutes!
756 Questions
260 Questions
271 Questions
253 Questions
254 Questions