...tray and put back the complete assembly including the used grounds bin. This has happened to us with the Z5 also, and we have determined the machine didn't run the full cycle somehow. We get the tray ...
...tray and put the tablet in when prompted, the display stays on "empty trays" and the cleaning cycle does not start. if you don't clean the contacts at the back of the tray it sometimes thinks the ...
Question about SCX 4200 All-In-One Laser Printer
...put the paper tray back in it doesnt react like it usually does by then trying to print. Hi I had the same problem, what you need to do is ruffle up the paper abit dont put it in so neat , for some ...
...put paper in tray-tray is full I have cleaned the paper rollers but when I try to copy it keeps telling me to put paper in tray Hi, It sounds like it has lost how to detect the paper tray, this could ...
Printer shows 'add paper' but paper is full in tray..... says add paper and paper is full! The tray must lift up when you put it in the printer. Either with springs or a motor depending on the model
...tray of ice and put back in, not producing any ice. Make sure the "Full" actuator is in the down position. Sometimes when the ice tray is removed, the full actuator flips up to stop ice production. ...
Question about LaserJet 3800n Printer
Tray 2 is empty and to put paper in. Paper is in tray 2 and full. I can only print from Tray 1 when I manually switch printing to Tray 1. check the paper type and the paper size from the printer menu,
Question about PSC 1410 All-In-One InkJet Printer
...tray is around 3/4 full, not more 3) The rubber rolls that pick up the paper may be dirty with paper dust or dirt. Put 2 drops of alcohol on q-tip and carefully clean them. Let dry 30 mins. before ...
...know the answer to this one, but mine occasionally will not the tray has paper in it if (1) it is TOO full (I always put in a little less than capacity) or (2) if there are only a few sheets
tray to catch water when you put in more than 10 oz. When that tray becomes full it seems like the machine is leaking but the tray is just overflowing. Empty the overfill tray and try not to overfill.
Usually answered in minutes!
1,392 Questions
801 Questions
725 Questions
572 Questions
453 Questions