Questions & Answers for: where to put a jack

Question about 1997 Breeze

1 Answer

...easy just jack it up make sure u put jack stands under it first the it under the car put a jack under side of motor raise it up a little take bolts out remove mont then put back in its a simple ...

Ad

...put a jack under the front of the motor, take off the motor mount and lower the jack to rock the motor forward to allow for extra room, be sure not to jack up the oil pan and put a board on the jack ...

Ad

put the jack in the middle of the frame and jack up one side at a time. Make sure this is a real floor jack and not the one included with the vehicle as it's not designed for this. If you want to jack

Question about 1991 Explorer

1 Answer

...Put a jack under the door with a piece of 2x4, as close to the middle as you can. Jack up the door, watching the hinge pin until pin is in the center of the movement range. Put a long metal rod or ...

Question about 1999 Boxster

1 Answer

On one jack stand. Problems How to put on jack stands Jack the car up, insert the jack stand and lower the car. Only put jack stands on one side of the car at a time.

...the pressure. Perhaps the board is the issue? first, I would use jack on one side of car then put it on jack stands, then go and jack other side up and put it on jack stands, just the way I would do ...

Question about 2010 Alto 1.0

1 Answer

...Where do I put the jack to change a wheel on my Suzuki Alto? You must put the jack on the side of the car underneath the doors. You will see some indentations on the lip and that is your jacking ...

get under it . You will need to put the jack under the transmission an jack it up just enough to take the pressure off the mount . Un bolt the old one , put the new one in bolt it an torque it to spec

...put the jack under the spring support right beside the wheel? I have been in a similar pinch before, where it would not raise enough. I used one jack to raise as far as it could, then used another ...

...put the jack to jack it up, and then where to put the jack stands.... After you jack the vehicle up put your jack stands under the joint where the rear control arm hinges under the body. this link ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...