Questions & Answers for: Audi AllRoad where do i put antifreeze

Question about 1990 V8 Quattro

1 Answer

...ok i have a 1990 audi V8 quattro the engine runs great still with 180,000 on it but when i go to put it in revers it dies unless i give it a little gas also when i put it in any gear in sport,eco, ...

Ad

Question about 1990 V8 Quattro

1 Answer

stalls at a stop 1990 a8 quatro starts fine then as soon as put into gear wants to die out. sometimes is perfect. sometimes just loses rpms an have to flutter the petal an she goes. have tried ...

Ad

Question about 2004 allroad

1 Answer

...undo this and lift prize the calp up then remove 1 pad the inside on where the piston is then put calp back down and put the bolt back in just to hold it in place then when you have done this ...

on my audi the speedometer doesnt work and the dash light doesnt Okay i have severel problems Sometimes my speedometer doesnt work The dashlight doesnt go on when i flip on my head lights My driver ...

...on 2002 a6 allroad . particularly obvios on tight turns at low speed This may not help but it may.Put the car in 4wd and reverse slowly.At the same time switch the car to 2wd.Give the throttle a ...

...put new antifreeze in it yet..any suggestions to what the problem is.. if i did not put in manufacturers suggested antifreeze could there be a problem.. i filled it up like 7 months ago and it worked ...

When the heater is on, the humidity seems to be high. I turn on the defroster to clear the rear window. Is this from water leaking into the car (has happened in the past) or something worse? There are

Question about 2004 allroad

1 Answer

I own an Audi All-Road 2004. The rear door window washer has a problem. It seems like the tube bringing the antifreeze to the spray jet is disconnected inside the door as my door cover bottom becomes ...

Can not get the rear inside door moulding to get to the wiper mot I own an Audi All-Road 2004. The rear door window washer has a problem. It seems like the tube bringing the antifreeze to the spray ...

Question about 2004 allroad

2 Answers

heater not working well flush out the engine. use a hose pipe and flush engine out, take both heater feed pies off and go back and forward with the hose pipe on them until water is clear. then test by

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...