Questions & Answers for: push lever Sewing Machines

...reverse lever many times but never had it stay in reverse. There seems to be no resistance when pushing lever. lever must be locked in. if possible, you must open it and try to look for something ...

...push the lever over to the side. To raise them back, push the lever the opposite direction, back where they were originally. You will not actually see the feed dogs move until you turn the handwheel ...

...for the buttonhole lever, just behind the needle threader lever. Pull it down and push it up again. The machine gives a warning message if you want to sew and the button hole lever is down. Good

...to do this. Please help! The drop feed lever is located underneath the free arm bed at the back. To raise the feed dogs, push the lever to the right. To drop them push it to the left. Hope this

push the pump, which works, but I can not disengage the lever. So therefore it does not thread. There should be a button which you press while turning the handwheel toward you. This usually disengages

...lever. Push the buttonhole lever away from you. Start machine to complete entire buttonhole.NOTE: While making buttonholes, maintain an even sewing speed for uniform buttonholes. When buttonholes are ...

...lifting top to oil, reverse lever now doesn't push down into reverse take off the top again and take a good look while pushing the reverse lever.  See if you can see what the problem

...on top of machine. Push lever toward bobbin peg or peg toward lever (whichever moves) and arrow by peg should show which direction thread will wind. Then push pedal and away you go...hope that

...a lever on the front of a Singer that you push in to make it sew in reverse. You will have to pull the lever forward or push it in again, to get it to release and then the machine will sew

lever is locted at the rear of the free arm. It is a bit like a switch. The diagram on page five of the manual shows it being operate with the left hand. Push to right to drop feed and push to left to