Questions & Answers for: Samsung push lever

Push "up" on the green lever above the ribbon cartridge. The ribbon should pop out slightly. If it does not pop out, then try prying out the cartridge while pushing up on the grean lever. Pull out the

...small lever is pushed all the way in, it should already have a small strip of masking tape on it. Push it all the way in and then try it. This helped with mine and I had a simular problem. Good ...

...push it out with your fingernail, Lever out the camera, and unscrew the screws you will see, remove the 2 thin iron that assists the phone is sliding up and down, Lift up the board of the phone, you ...

...Push the Zoom W/T lever to the right to enlarge the subject. Digital zoom TELE : Push the Zoom W/T lever to the right again in optical 4x zoom mode to enable digital zoom (software tele). Release the ...

...the glass after about 1-1/2 cups. Model RS267TDWP 26 ft side by side After it stops if you release the push lever and push it again right away the water flow starts again. filter needs to be ...

spring is not working on the ice maker lever on the outside door when you push your glass for ice the lever sticks and doesnt return it jams with ice ???? What is the model number of your unit?

...a sensor lever at middle of the engine base, under the toner cart. when the cart inserted it has to pushed half and other half is for paper jam-1 error. Pl. check the lever-check the smps photo ...

another short lock (near the long lever). If door lock broken then the micro switch push the lever and door not closed. the basic problem with the micro switch and related mechanical alignment. Thanks

...base a small plastic lever is there, push that lever upward, if printer goes ready, check the floor of the printer and tray else some mechanical adjustment is required or put a bunch of

...push this switch metal lever in. This could cause other problems, I have never tried that. (remember that the fuser roller is very delicate and easily damaged. 2 screws on the fuser end can be ...