Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...push the "rod end over the rear axle doesn't move the lever" lever forward - the brake is sticking in the "on"position - wiggle the lever back and forth, if it moves more than 1/4 inch, use a half ...
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...lever got rounded on mine and not be able to push the inside switch in all the way. So I just super glued a little plastic on the lever piece and put the battery together. It's been working fine ever ...
...pushed when not running. Chances are you must have disengaged this lever maybe by accident. If you push it back in, the transmission will work right again. Usually it is a wire with a loop on the
...Push your lever fully forward and try to start having made sure that the petrol valve is open (if it has one) and that the carb has been primed (if you have a primer button). If the engine does not ...
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...push the left height adjustment lever toward the center of the mower. This will unlock the lever from the locking pin on which the height is currently set. Read more: How do I Adjust the Height ...
Question about 24 Hp 48" Deck Yard Tractor
...to find the first time. This lever disengages the drive inside the auto gearbox so the mower can be pushed by hand. If the lever is not not moved, pushing the mower also tries to turn over the engine ...
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...lever i can push in the lever to engage the rearend on the back of my mower, but still can not get it to lock. it is stuck in neutral. (push mode) ive tried holding lever forward, rolling the mower ...
Question about 20 hp 42 in. Deck Lawn Tractor - CA Model
...get pulled in the rear of the tractor to disengage transmission?..usually out is disengage and in is engaged. look around the back panel behind the rear axle for a small lever you can pull or push
Question about 20 hp 42 in. Deck Lawn Tractor - CA Model
...be a lever to push/pull which will put the hydrostat in neutral. This is all assuming that it is a hydro and while running the machine won't move when putting the drive lever into forward or
Question about 20 hp 42 in. Deck Lawn Tractor - CA Model
...sloppy. A new problem now has developed in that a gear grinding sound is made when the lever is pushed forward or reverse. This noise stops when the lever is stopped being moved. No speed
Usually answered in minutes!
1,998 Questions
1,006 Questions
710 Questions
725 Questions
285 Questions
