Questions & Answers for: push button 4wd sierra

...push the button to kick it in and it will kick in but it sounds like a chain sliping or axle sliping it still pulls alittle but sounds bad. this is in a 2001 gmc sierra 1500 auto push button z71. ...

...push the button for 4wd or four low and it works, the light illuminates, the drive motor engages the transfer case, and the front drive shaft locks in. But the front wheels do not turn. HELP! try ...

...push button control for the 4wd is innoperable sounds like a bad switch or selector motor. I just had thiis problem today for the first time.  For some reason my Yukon kicked into 4WDLo and the ...

...push button 4x4. The 4wd does actully work, tested in 4H and 4L. The problem is that when it is in Auto 4WD or 4H it will work until it kicks out with a message saying "service 4WD". we just recently ...

...actuator or the front axle actuator? Thanks! fullyjr. Engaging from 2WD - 4HI/Lo requires movement of the vehicle. very low speed under 5mph, push button should engage. the vehicle has to be

4x4 not working. light on push buttons not on. tried unhooking batt. changed push buttons assembly check for a bad fuse.

...push the 4hi button and then goes back into 2hi. but when i push 4lo it locks in and works fine. I tried changing the 4wd motor on the transfer c I also have to have the truck in neutral to even get ...

push button to the actuator but not beyond? Light on , DTC- diagnostic trouble code stored in the 4X4 control module . Take's a professional type scan tool to read these code's . Your best bet AAMCO .

why does my 4 wheel drive not work 2004 gmc 1500 z71 i have no lights coming on on push button The 4wd button on the inside might be no good

...push button 4WD transmission 4L60E 5.7 go into a 1999 K1500 push button 4WD 5.7? The links lead me to believe there are interchangeable. In fact this page confirms the compatible models ...