...punch out the rivets, then using a 1/4 inch drill, drill out the aluminum holding the regulators. You will also see three star scres holding the window motor remove these, take out the window motors ...
...hard is it to change a snapped front wheel stud you will need to hammer it out with a hammer and a punch, make sure the vehicle is secured on a jack stand, several hard hits and it should come out,
punch line that's even better. Instead of removing the core intact, I cut off the inlet and outlet pipes a couple of inches above the point where they turn upward from the core. (I used a Dremel) They
Question about 2008 Accent
...punch the pedal and the engines revs perfectly. The problem comes after the engine warms up or a few minutes a driving power seems to begin to diminish. when revs drop and I accelerate again (i.e. ...
Question about 2008 Accent
...Hyundai accent airbag light on pulled fuse then put back in and comes rite back on help This problem is becoming more and more common and in the UK will be an automatic MOT fail even if there is ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions