Questions & Answers for: The pulling out watch stem

SETTING THE TIME ON A INOX WATCH from the images I found it looks like you would pull the stem out and rotate

How to restore the calendar after battery replacement? If you have an analogue watch(one with hands) just pull the stem half way out and you should be able to set day/date.

...There is only one twist(er?) on the right side of the watch. The watch hands don't move. Please help! :) Analog Time Display you have to pull the stem (twister) LOL out before the hands rotate

...analog hands on an ASJ watch after setting the time. I pulled the stem to set them and they move only when the stem is touched. pull the crown to set the hands and when set push it all the way back ...

how to remove the plastic between the stem and the case-how do you remove this plastic simply pull the plastic tab out then push the crown back in the battery is energized when the stem ( crown) is ...

...watch has a screw-down crown. Turn the stem anti-clockwise until it springs out slightly and you'll be able to set the time. Remember to screw it back down afterwards to maintain water resistance of ...

...stem will come out 4. if quartz, will have a hole with a small arrow pointing to it, with a needle insert into the hole to press the lever inside. Otherwise need more information on the type of watch ...

I cannot adjust time on my Carriage model # c3c359. the stem does not pull out. You may have to take the watch to a jeweler for repair.

...received an Oulm watch 3811 and the instructions are for all the secondary bits and pieces but nothing about how to adjust the main hour, minute and second hands USUALLY PULL STEM OUT AND ROTATE ...

If I pull the stem out the watch so I can take the insides out and put it back in will it work? try removing the back