Questions & Answers for: Bulova pulling out watch stem

...watch going. I pulled the stem out and set the time and pushed the stem back in. It is not running. Please advise look for a tiny, clear plastic spacer washer on the stem and remove it. this is just ...

...caravelle quartz mens watch? Pull the stem out 2 clicks the in 1 click turn stem clockwise for day and counter-clockwise for month. to set time pull stem out again 1 click, when finish push in 2 ...

...watch with 4 stems. 2 on each side. One is an on/off stem which is on the right side of the face. 1st: make sure the watch is set to "tme" , the botton dail display, press bottom right stem 2nd: pull ...

watch, Pull the stem out to the set position and simply turn the stem (winder) every second time around to the 1--2 3 O"oClock position the day will chage, once you get the day push in the stem in all

...watch, If yours has a stem (winder) it"s 2 position, to set Day pull stem out and rotate the hands till the day appears, push stem in all the way, Now slip your fingernail just under the crown and ...

stem to adjust the time, go thru the complete 24 hour cycle to adjust the DATE and time of day. You should have the DAY or Month and correct date and your watch will change the DAY, DATE at the proper

...stem out to set the time of day, keep cycleing the watch until you come to 1 day before the day you want. NOW! push the stem back in. NOW! slip a finger nail just under the crown and gently, gently ...

...a Bulova Super Seville watch how do you set the day and date? Pull the stem out one click, rotate stem clockwise to set day, counter clockwise to set day, pull stem out to second click to set ...

...stem goes in the watch. There are 2 screws right there, 1 left and 1 right.the one to the left is it, but only loosen it 2 1/2 turns no more than 3 or it will come loose from the mechanism below that ...

...to remove the movement from the front,tried to pull the stem out won't budge any ideas. this link is a good site for all watch problems ...