Questions & Answers for: pulley misalignment

...off for several reasons.: Wrong size or stretched... should be changed ever 3-6 months. Misaligned pulley on brush or idler pulley on 2 belt unit Misaligned motor.. this is rare Put in a fresh ...

misalignment of steering pump biases belt to front edge of crankshaft pulley... since there doesn't appear to be a 'y' axis adjustment, must presume pulley itself may be fatigued?? its possible that a

Misalignment also is likely if the arm can be vertically rocked back and forth. This means the pivot bushing has worn down. Idler Bearing Wear With the engine off and the belt removed, manually rotate

alternator belt broke Check all pulleys for bearing failure. If any pulley is binding, it means the bearings have frozen or a pulley may be misaligned. Check alignment also A pulley may also have lost

...always there Your drive belt is getting misalign,from the inboard side,this is where it will fray.go to the crank pulley and inspect the crank pulley it may have came loose and caused a

...belt keeps coming off This issue is likely due to misalignment between the driving and driven pulleys. This misalignment can occur if one of the pulleys is loose on its shaft. You may be able

misaligned drum/pulley Drum was not spinning. Found belt was shredded against drum and beyond saving. Replaced belt and put it on pulley. When spun the belt is now rubbing against drum and will not ...

ltx 1045 belt will not stay on belt flys off Check for misalignment of the pulleys or damage to the pulleys. Check the pulleys for side to side play/wobble indicating bad bearings. Also check for ...

...DRIVE BELT ITKEEPS COMING OFF THE PULLY If the belt is coming off it is misaligned or the tensioner pulley unit has failed and is providing insufficient spring tension to retain the serpentine belt. ...

I recently got the fan belt/ auxiliary drive belt and tensionor replaced on my car but the belt on some pulleys has slipped a rib and coming off. What would cause this to happen sounds like its ...