Questions & Answers for: Chrysler Sebring pulley belt

...pulley.loosen tension pulley to adjust belt. tension. then you put the other belt on power steering pump pulley and crank pulley. adjust belt tension loosen power steering pivot bolt. that

Ad

Question about 1997 Sebring

1 Answer

tensioner bolt, Pun on belt careful to watch the routing, and pull pulley tight, with hand, and then tighten the tensinner bolt. Belt should be taught, but not very tight. Then tighten the pulley bolt

Ad

...bolt, Pun on belt careful to watch the routing, and pull pulley tight, with hand, and then tighten the tensinner bolt. Belt should be taught, but not very tight. Then tighten the pulley bolt. ...

...Pulley that the belt will go on. b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right. c. Using a Serpentine Belt Tensioner Tool or Wrench ...

...Pulley that the belt will go on. b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right. c. Using a Serpentine Belt Tensioner Tool or Wrench ...

Question about 2008 Sebring

2 Answers

...belt this could be a bad pulley or alternator, you will need to remove the belt and spin the pulleys by hand to see which one is making noise, it could also be the ac compressor pulley, start there. ...

Question about 1997 Sebring

3 Answers

...pulley by means of a drive accessory belt. If the clutch in the compressor locks up, it will break the belt. You can either buy a new compressor, or bypass the compressor by using a shorter belt and ...

Question about 1999 Sebring

1 Answer

...belt tension pulley. Does the pulley effects timing belt inside 6 cylinder motor? no it doesnt but if that belt breaks it can and does end up with bits behind the cover which destroys the timing belt ...

Question about 2007 Sebring Sedan

1 Answer

an "AUTOMATIC BELT TENSIONER PULLEY". If there is a problem then either the tensioner is defective or the belt is incorrect or defective or another one of the pulleys it drives has a bad bearing in it

...pulley due to the type of belt used. Maybe you can find a good used pulley of a wrecked car? It doesn't have to be the exact same year/model as the pumps are generic and it's just a matter of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...