Questions & Answers for: Ford F-250 how to pull codes

...blowing black smoke on occasion and seems to be straining (need more rmp to maintain speed) When I pull over truck idles rough at about 2000 rpm (shaking) when hot , when I go to accelerate it blows ...

...- 'Check Engine light' on many possibilities you could start with with the fuel filter first things first what codes do you have? if you don't have a scanner you can have a parts store pull your ...

...OBD II compliant. They do have the OBD II port but the scanners you can use at the A/P store won't pull those code(s). You will have to use a scanner that pulls PSD code(s) or go to a shop with the ...

...pull but stop at like 60 mph like you hit a switch. This is a change from wheni pulled my camper to Georgia in october it pulled good but the check engine light came on there were no codes when i ...

turbo not pulling when loaded..unloaded it pulls some like to 50 mph then turns off like you hit a switch...when loaded the trans will downshift before the turbo does anything...this has changed since

...pull it out of the shop it would barley haul it self. I put it on The computer and 2 codes came up (p0353 and p0357. I changed coil packs 3 and 7 and it make no difference? I'm stumped. It ran way ...

...a trip to autozone or advance auto parts or pepboys and have them pull the codes. they will give you a print out of what engine codes are tripping and the possible reasons with solutions to fix

...pull hills and does not want to run over 1800 rpm on the road Starts and sounds OK but when you step on the accelerator quickly will not pick up rpm. It can be brought up to high rpm slowly and will ...

I have 04 ford f-250 6.0L its crank but no strart...i check fuel pump its working Pull the codes with a code reader. Could be a simple crank sensor or an ignition fuse.

...ford f250 2010 model I need the door code location or how to find it. should be on the maps box . pull out the insides of the glove box that is sit on top of