Questions & Answers for: Ford Expedition how to pull codes

...pull to reset the OBD codes on a 1999 Ford Expedition 5.4L? dont pull anyfuses. Unhook the battery for about 30 minutes. IF there is a problem with it you havent addressed the computer will light it ...

surging at idleI have a code pulled for P0171 but it read as bank 1 reading lean... that was last night. tonight is when the surging started... Any ideas? code p0171 means right fuel trim is lean the ...

...is your 5 digit code factory preset code. It is hard to get to. To see it you will have to loosen, pull, use a flashlight or a mirror but it can be done. 2002 thru 2007 is in the right panel behind ...

...you do now is pull the error codes, then you will have something to investigate....Some times you can get a lube shop to pull your codes for free, then research what the code means...and start

check engine light is on and it runs rough You will need to pull a DTC (computer diagnostic code) from the PCM (engine computer). This will require a code reader ($40.00) or you can go to an Autozone ...

...itself to the factory code. Take it to a Ford dealership, they can hook up their computer and pull the code. Once you have the factory keyless entry code you can program your own into it. Our ...

pull out the top plastic panel off, then loosen the lower panel to be able to see the face of the computer module. The code is on a sticker on the face of the module. Programming a personal entry code

abs light came on bring it to a service repair station an have the abs codes pulled the most likely cause of this is a faulty rear wheel speed sensor you will have to have the code pulled from the abs

check engine light on Ok have the code pulled at a shop or parts store then let me know what the code is and ill help you with it

HOW CAN I FIND THE FACTORY KEYLESS CODE FOR 2003 FORD EXPEDITION - MY KEYS ARE LOCKED IN MY TRUCK the only way is to pull the code out is with a scan tool