Questions & Answers for: ps 42

Question about 42PF7320 42 in. EDTV-Ready Plasma Television

No picture, VSCAN issus.

...42 in Philips that is about two years old and the picture no longer works. When the unit is turned on there is no picture and you hear sound for about 3 seconds then it stops and the light on the ...

Question about PS42P2S 42 in. Plasma Television

1 Answer

Samsung ps42

...ps 42 any ideas. please follow the steps below: TV RED + SELECT (flashes twice) TV 0060 try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. ...

Question about PDP4225M 42 in. Plasma Television

2 Answers

Papa jim-akai PDP4225 42 in plasma slow on worm up

...42 in plasma slow on worm up when I turn on the tv the picture flashs on & off for +/- one munite befor it settles down. I think it's the PS but don't know for sure. You can hope for a loose solder ...

Question about PS42P2S 42 in. Plasma Television

1 Answer

Ps-42s5h plasma goes black when warmed up.

ps-42s5h plasma goes black when warmed up. ps-42s5h plasma tv goes black when warmed up. You can hit the back of the case and the picture comes back. Is it a dry joint or an ic problem on a board? TIA

Question about 42PF7320A 42 in. Plasma HDTV

2 Answers

42" philips plasma, black screen and flashing red light

...42" philips plasma. black screen and 7 red flashes on the led This fix was posted on similar problem, worthy of repeating: Replaced 3300mf 10V capacitors at PS. Both had bulged slightly. Upsized to ...

Question about HP-R4262 42 in. Plasma Television

1 Answer

Having problems getting a full picture on my PS-42Q96HD

Having problems getting a full picture on my PS-42Q96HD Having problems getting a full picture on my samsung PS-42Q96HD plasma. bits of the picture are cut off all around, ive tried adjusting all the ...

Question about PS42C91HDX 42 in. Plasma TV

1 Answer

My PS-42C91H/PS-42C91 fell and the

My PS-42C91H/PS-42C91 fell and the screen broke Is it possible to get it replaced? and how much does it cost No,not worth as a whole tv anymore,because by replacing the Plasma screen panel,will cost ...

Question about VP422 42 in. Plasma TV

1 Answer

Voltage missing from PS ON pin

Voltage missing from PS ON pin This could be any tv,the voltage is missing from the PS ON pin on the power supply.My question is would it hurt anything to inject 2.8 volts to that pin from a external ...

Question about VP422 42 in. Plasma TV

1 Answer

I have a Samsung PS-42C7HD 42 inch plasma TV. I have one HDMI Slot and want to connect two or three using a splitter but can't find one that works. I have tried one but it just said not supported on s

PS-42C7HD 42 inch plasma TV. I have one HDMI Slot and want to connect two or three using a splitter but can't find one that works. I have tried one but it just said not supported on s I have a Samsung

Question about 6842PE 42 in. HD-Ready Plasma Television

1 Answer

What does ps on mean on a flat screen power supply

what does ps on mean on a flat screen power supply PS ON, means the Power Supply is ON. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf ...