Questions & Answers for: Hyundai proper fill clutch fluid

...the floor. After filling several times and trying to pump the air out by engaging the clutch, I see fluid coming from the clutch petal inside the car. youre clutch master is leaking,youll need new

...so the clutch goes to the floor. After filling several times and trying to pump the air out by engaging the clutch, I see fluid coming from the clutch petal inside the car. you need a slave ...

...Clutch fluid" is brake fluid and doesn't usually need to be changed. You add more through what is called the "slave" cylinder. It is usually connected directly to the master cylinder and looks alot ...

...for brake and the other for clutch so if clutch fluid leaks it does not affect the other chamber that feeds brake master cyl so same fluid for both systems just fill to level mark on ...

...clutch may be worn out and needs to be replaced. Also if you fill the resivor you may need to bleed the system. Fill the resivoir with normal brake fluid (DOT 3) them locate the bleeder screw on the ...

...clutch. I checked the fluid and it was nearly empty. I filled it back up, pumped the clutch until it had pressure but the clutch lost pressure again; I did not have enough fluid in it. I finally got ...

clutch fluid leak I have to pump my clutch to shift without the gears grinding, the clutch fluid reservoir was empty so I filled it, and now it works occasionally, but now I notice there is a leak ...

...fill the clutch and brakes via the same reservoir. Can somebody please assist? Since the reservoir is the same for both clutch and brakes, definitely it can be air in the lines. Have your brakes and ...

then I would think the clutch is operating fully and the synchros are worn and need replaced. But either way, with metalic fluid being in the slave cylinder dust boot, the slave cylinder needs changed

...and check the fluid level in the clutch master cylinder as it may be low/empty and fill as required with brake fluid. You may have to bleed the system in order to get the clutch working properly ...