Questions & Answers for: BMW proper fill clutch fluid

Question about 1999 323 Series

2 Answers

...clutch pedal pressed half way down before it engages..parked the car over night following day pedal goes all the way down and does not engage.. have u checked the slave cylinder? should be inderneath ...

Ad

Question about 1994 3 Series

2 Answers

...clutch slave cylinder on the gear box could be damaged dew to age and standing non operation for long period. A flush and bleed could help but the slave in most times is damaged Gavin KDWORKS Auto & ...

Ad

...fill the brake fluid resevoir, will this solve the problem immediately? Also, what is the correct brake fluid to use? Thank you for your help! Vicki I suppose your clutch master or slave cylinder is ...

Question about 1996 318

1 Answer

CHECK THE FLUID IN CLUTCH MASTER RESV...IT USES BRAKE FLUID..IF OUT OF FLUID FILL AND WORK THE CLUTCH PEDAL MANY TIMES FULL TRAVEL..YOU MAY NEED TO BLEED SYS.BLEEDER IS NORMALLY ON SLAVE CYL.8 OR 10MM

Question about 2006 R 1200 GS Adventure

2 Answers

...clutch wears. Should I be able to see any fluid in the resovoir? What is the fluid? Mineral oil? Can I open the cap and add some? or is there a specail way to fill this resovoir? Thanks If your fluid ...

...AROUND LINES TO CLUTCH MASTER CYLINDER AND CLUTCH SLAVE CYLINDER.IF FLUID LEVEL ALL GOOD. LOOK FOR A BROKE CLUTCH RELEASE BEARING OR FORK.CHECK FOR BROKEN DIAPHRAGM SPRING IN CLUTCH PRESSURE

Question about 1999 328 Series

1 Answer

clutch fluid? This is for a 328, but should be the same for a 325. Location 1 is where you add the clutch fluid. The brake fluid reservoir for both the brake master cylinder and clutch master cylinder

Question about 1999 328 Series

2 Answers

...check clutch brake mastercylinder for low brake fluid if low you need to find fluid leak at clutch release cylinder find leak and fix then you need to bleed the the clutch hydralic

proper parts, are you sure the clutch fluid was bled properly? if there is even a bubble of air in there the clutch wont 100% disengage and cause more issues in 1st/rev. Some clutch systems need to be

...fluid fill location on a 2008 BMW 650i can vary depending on the specific model and transmission type, but generally it is located under the hood and accessed through a dipstick tube. To locate the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2001 BMW 325
2001 BMW 325

789 Questions

1996 BMW 318
1996 BMW 318

796 Questions

2003 BMW 325
2003 BMW 325

708 Questions

2000 BMW 3 Series
2000 BMW 3 Series

690 Questions

2001 BMW 5 Series
2001 BMW 5 Series

600 Questions

Top BMW Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...