Questions & Answers for: projector switches off

No access to half of menu Brand new Optoma 1651 projector won't recognize PC with VGA connection. Can only access Setup & Options on the menu so I can't verify is VGA is switched on. Not my first ...

no image My projector is hooked up to a docucam only. After being unplugged once it fails to recognize the signal. All power/cables were disconnected and reconnected. Still no signal. I read the ...

SWITCHES TO MEMORY STICK WHEN VIEWING ON COMPONENT INPUT, THE PROJECTOR WILL SWITCH TO MEMORY STICK INPUT. ONCE THIS HAPPENS AND YOU SWITCH BACK TO COMPONENT, IT WILL SWITCH BACK TO MS FREQUENTLY. YOU

...switches off immeately after switching on the green light comes on momentariry then turns red andnothing happenswhen you switch on It turns out that i fixed this issue, I opened up my projector and ...

...projector switches on ok, the fasn comes on and then it switches itself off and gives an overheat LED. Most projectors have air filters. Yours may need to be removed and cleaned. No air flow = ...

when you are watching on projector sanyo PLV-Z2 it goes off and when you are watching on projector it goes off and warning light come on and if you switch off for 15 mins and switch back on it starts ...

Projector won't switch off either with the remote Sharp XVZ2000. Projector won't switch off either with the remote or manually. It works fine and goes in to standby when their is no input, but you can

...for a few minutes before the red light comes on and the projector switches off. What is the problem? What is the solution? dear, please check the color wheel inside, maybe it is color wheel ...

projector only in stanby mode does not switch on This projector provides two different remote control codes; the factory-set, initial code (Code 1) and the secondary code (Code 2). This switching ...

My Panasonic PT-LB 51 AE Projector switched on automatically,when I plugged it , I don't Have remote control for it , and can't operate any button on the top of the projector, How can ...