(RCA cord), the projector doesn't read the video input. The video input is set on automatic, and it worked yesterday. Will it work if you change the input to manual and select the correct imput source
...input Projector comes on shows blue screen, but when I try to put anything into input video, says no input. Tried new cords and multiple different devices. make sure the resolution matches the
Question about RX-V730 Receiver
...projector .whatever you have run from projector to receiver input example component red,blue,green then run from both say to the av input 1 then set your receiver to av1 and you should get
Question about LV-S2 Multimedia Projector
...input My Canon LV-S2 projector does not work when I use component input signal, but works okay when S-video or Composite video signal supplied. Most times the input auto select does not work. I even ...
Video input port (yellow RCA) is good, and that the cables are good. Also, the projector works fine with input from the Computer/Component input. if the video signal is HD, the projector can't read it
Question about LVP-S120 LCD Projector
...on another projector. Using a PC plugged into the projector I can see display info. It's just the DVD/VCR input that doesn't seem to be going thru. do that again and press input on your
projector reflects as it should, i can access the menu and input options which i then select RGB scart (though have tried both RGB input options). Nothing happens, and upon looking into my computer it
Question about ED-S3170A LCD Projector 1700 ANSI Lumens 400:1 Contrast Ratio 800x600 SVGA Resolution (ED S3... Multimedia Projector
Projector comes on, everything seems to work, wont recognize any inputs when they are plugged in, says that there is " no inputed detected" There are several input that you will have to select. RGB ...
...projector but I cannot get any input signal. The screen just displays "No Input" Scroll through the inputs using the input button on the remote control to see if you can find the right input. Hope ...
...projector ON and all the input devices ON. Then, one by one plug each input device (already turned ON) into the projector. See if this helps. I have a SONY monitor that supports multiple inputs and a ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions