Question about HT1000, MTS2000, MTX8000/9000 Compatible 2 Way Radio Battery Eliminator
programming issue or a radio issue. When I tune the radio to any channel BUT 1 or 11, a constant tone is heard. Button presses or switch position does not affect it. Any ideas? You will get a constant
Question about HT1000, MTS2000, MTX8000/9000 Compatible 2 Way Radio Battery Eliminator
...programming to set the channels, now I can't get the channels I used to get, and I don't know how to override the automatic settings. I don't have cable, and apparently that is what the automatic ...
uniden/bearcat BC-100 hi there. how do i program this and how do i make it scan!? thanks If it's indeed a BC-100 and not a BC-100xlt, the 16 channels are easy to program and use. 1. Press MANUAL 3 ...
channels are programming with the television and I am unable to see cable (will not select channel 2, 3, or 4 to do so). I have the same problem. Try to programa de ic u201v with the original program.
...programming your VCR for recording, that works just like it did before the cable box was installed, but with two major differences. The first difference is that the VCR must always be programmed to ...
...programming. If all channels have been programmed (there are no open channels in the bank), channel 1 appears. Use [UP] or [DOWN] to select a new channel and even overwrite old channels. 4. Press ...
Question about BC60XLT-1 Handheld Scanner
...the channel display showing 000.0000 you may be able to program a new frequency into it, and the new program will release the lockout. Have you tried the normal programming for any channels? Bill ...
...Programming channels automatically Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or ...
...programming channels (-left-hand column). ? If the ANT/CABLE input signal type is set to Cable, the automatic channel programming process erases channels that were previously programmed into the TV's ...
Question about REGZA 42 in. Flat-Panel LCD HDTV
On my jvc tv model hd-61g787 I cannot program channels you can program channel either in the remote control or in the tv button panel. press menu then go to manual fine tune so you can program the ...
Usually answered in minutes!
980 Questions
644 Questions
497 Questions
317 Questions
274 Questions