Questions & Answers for: Chrysler Town and Country program remote

...there is no problem starting, but I don't need it in the summer :) Any thoughts? I tried reprogramming the idle with no affect? Thanks It would almost appear that your battery is weak. If

have to repeatedly press buttons on my remote transmitter The battery in the transmitter may be low on power. Try replacing it.

Newly installed astrostart remote start fires, but then quits running. I have the astrostart rs-623 installed on my 2006 v6, automatic mustang. This happens most often in the morning after the car has

Remote starter for Chrysler town and country Remote start will start van but the van will only run for , about 15 to 20 seconds and stop. The van will have to then be jump started. I posted this ...

door diagram Drivers side door lock will not work with key fob only manually Have to get the remote reprogramed by dealer

...remote on a 2010 town and country. tells me a bad key. Check for a flat battery in the key fob or reprogram the key top the CPU unit of the car. If Boyd's option doesn't work, check what the ...

...program my Remote Control with automatic starter on my 2009 Town and Country Van My remote will not automatically start using the remote control. my second remote works fine. I have replaced the ...

...the battery, etc. I think the problem is with the programming. Please tell me how to Program this Remote. Should be some dip switches inside check the new one by opening up and do same for new

...point. after removing the battery or battery lead there are problems created in the ECM and CPU program It is a good idea to run a scan tool and reset the program and see what happens after ...

my 2007 town and country hatch opens fine from inside with console or remote but will not unlock and open from rear Locking rods disconnected. Lots of fun with channel lock pliers and a dentist mirror