Questions & Answers for: pro torx

it works but it doesnt have the spring it used to This is called a multi-function switch. You will need torx sockets and possibly inverted torx sockets. A pro technician can do one in about 1.6 hours

...Pro C2636? You have to move or remove the finisher, depending what finisher you have. Open the door on the right side of the machine . It is about 4 inches high and 14 inches wide. Open the front ...

...screws I ground an old screwdriver down to match the shape! Those screws are called 'Tamper Proof' or 'Tamper Resistant'. If you google those you'll find tool sets that will open dang near ...

starter coard broken poulan chain starter system I require information The starter housing is removed with a #20 Torx bit, then the cord replacement becomes obvious. You'll need to prewind the spring ...

...PRO TORX ONE MILLION CANDLEPOWER SPOTLIGHT? Have you tried calling the manufacturer, Optronics, and asking them whether they could provide you with a copy of the instructions? (800) 364-5483 Or you ...

steering wheel on 1999-2004 VW Passat, Jetta, Golf, and Beetle where Torx head screws are no longer used. Best left to a pro. Disconnect battery before attempting any airbag repairs! have a good day !

...Dollar store. You can get them with, or without, the little hole for the pin in the head. You will probably want to buy a little 'set' that has multiple sizes of bits, and a driver, with an ...

...pro 260 ACE Hardware has everything you need, I have the poulan also and all you need is the torx screw driver and get the little clamps for the fuel line, I got the kit which had all in it...good ...

...Pro If youre sly you can get away with using a paper clip to push on an eject mechanism on the side towards the back. If that doesn't work you may have to disassemble. Depending on which year model ...

I am having problems finding the little Torx T5 screws that hold the back panel on to the Asus Zen Book pro UX501v, please can anyone sdvise. Try flea bay. Search for Tx5