Privacy Code. This prevents you from having to listen to other user's conversations on what can be busy channels with a lot of activity. In one of your radios has CTCSS enabled and the other does not,
Question about Talkabout T5720 (7 Channels) 2-Way Radio
...Privacy Code or the Privacy Code function needs to be turned off on both radios. The Privacy Codes can be used to keep the radios silent unless they receive a signal from another radio using the same ...
...Privacy Code function set up incorrectly. The privacy code function mutes the radio unless it receives a signal from another radio transmitting the same privacy code. If Privacy Codes are turned on ...
Question about Talkabout FRS 250 (14 Channels) 2-Way Radio
...privacy code 3 second is on Ch4 with privacy code 1 The 3 and 1 are like "Private Line" codes. Check the manual on the use of the private channels. Both radios have to be on the same channel and or ...
...to set new code selection. NOTE: Some early TalkAbout models did not offer privacy codes. You would be able to tell by looking at the screen, there would be no number in the upper right. Best
...Privacy code can be anything you desire. It simply keeps you from hearing other users on the same frequency. Here is a link to the user guide: ...
...only transmits does not receive. Is this a setup problem, what am I missing? You're not trying to use a privacy code on one radio without using the exact same privacy code on the other radio, are
Question about Talkabout T5720 (7 Channels) 2-Way Radio
Sends well but will not receive unless mon is pressed. Perhaps the monitor button is over-riding a privacy code. Set the privacy code to zero and then try it again.
Question about Talkabout T5300 (14 Channels) 2-Way Radio
...not have privacy settings (interference code eliminator) capability. Here is a link to the user guide: http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T5300_T5400_User_Manual_E.pdfBest
...code thing? if so how do i set it Pls swotch off qt & keep the same channel also keep all privacy codes to 0 , try ur set it will get connected to rest 3 , do not forget to keep privacy code ...
Usually answered in minutes!
165 Questions
90 Questions
92 Questions
70 Questions