...wrong with the image either. I've downloaded the new driver, checked margins in the applications, rebooted the printer, initialized the NVRAM, and found no error on the printer. Nothing's helped! Any ...
...wrong paper size. There's an arrow to scroll to the size you're printing on. Then click Properties, then the Paper Quality tab. There's an item that says "minimize margins". You could try printing ...
...margins in "page setup", whenever I print the text gets cut off on the right side. The only solution I have is to manually increase the margin size in "page setup" before I print. Is there something ...
margins within MS Word goto File Page Setup MarginsAnd check that they are OK. if not check that you haven't got the wrong size paper set in word. Same as above but select Paper size then check in the
...prints correctly. The work I do, though, has to have an inch margin. Any suggestions? Thanks, Sarrah Your paper size settings for Tray 1 is probably wrong. Make sure it is set to Letter and the type ...
wrong with your Word printer setup. Go to Word, then from the File menu select the Print option and when the print window opens see if the HP deskjet is selected as default printer. Then, in the upper
Question about X2250 All-In-One InkJet Printer
...wrong? It's because of your page set up. If you have very small margins this will cause it. Also Headers and Footers even though you haven't put anything in them the printer and the word processor ...
Top and bottom margins wrong On the first copy of each print run, the top and bottom margins are unpredictable. Ensure the proper tray setting metric or inch.
Question about Windows 7 Professional Upgrade Version for PC (7KC-00040)
...with a big margin on the right hand side (although set at 0.2) Click <Page Layout> <Margins> <Custom> Then click the "center Horizontally" box Probably you got the wrong paper ...
Question about Windows 7 Professional Upgrade Version for PC (7KC-00040)
...margins are set to 0 or border-less printing is selected. Microsoft Word. Windows 11. You are compensating the wrong way. Setting the border to 0 (zero) means it will try and print to the edge, but ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions