Questions & Answers for: Kodak EasyShare printhead jam

printhead. any suggestions? im having the same problem with my 5100, after a paper jam, part of the little sponge looking cloth in the printer was ripped, and i couldn't set it back in the printer, it

...jam To resolve this issue please do the following: 1. Open the printer access door(the gray part) 2. remove the cartridges 3. remove the printhead, to remove it press the release latch located on the ...

...jam error message will appear if the printhead is not correctly installed. Try removing and reinstalling the printhead again, but make sure it snaps into place. Try loading a sheet of plain paper and ...

...jam out of the box is a doozy. Open the printer access door. If the printhead centers, remove the ink and the printhead. With the printhead out, unplug the printer and plug it back in. Replace the ...

...printhead is detected calibration require, load paper and press start" Thats the way of overiding the paper jam error message of your kodak all in one printer hope this will help you guys by: E.brown ...

...any paper in the printer and can find none at all. If it's a brand new printer, try removing and reinstalling the printhead. An incorrectly installed printhead will give you a false paper jam

...jam, the printer will not print in black. Verify that the ink cartridges are intact and securely inserted into the printhead, then make the same print. Lift the printer access door, then remove the ...

...jam. I've waited a couple days ? Any solution ? Try this one Take out the inks and printhead Leave the cartridge door open, then unplug the power cord from the back of the printer while the access ...

...jam Try this one Take out the inks and printhead Leave the cartridge door open, then unplug the power cord from the back of the printer while the access door is open Close the cartridge door once the ...

...printhead carige un jam? pull ed cariage. Can you tell me how the head was jammed in the first place. Is the head jammed in the middle of the carriage? If it's jammed in the dock then you might need ...