Questions & Answers for: Brother DCP printer drum

it will take time to dry. after the drum kit dry, I rolled the drum, there still something on the drum, I use a tissue paper cleared it. put the toner back, insert it back to the printer. It is fixed

printer drum? I have a Brother HL-1470N printer and when it prints it prints dirty and all it needs is to probably clean drum and I'm wandering how do you clean the drum? Thank you You don't clean the

...drum then press yes and off on printer iff error is still remove the drum unit and remove drum in drum unit and clean drum cleaning brush.. And also drum charging grid and reinstall drum unit and ...

...drum but my printer won't work because it keeps saying Dust on Drum. do I ned to replace the drum? You need to run that blue tab back and forth about 20 times to clean the drum corona, use canned air ...

...drum replacement for this printer. I have a brother 2170, and ordering a replacement drum through Amazon and saved a good bit over what I could have purchased it for locally. You can reset the error ...

...drum kit making the printer believe that the drum kit was replaced. For this you might need the manual. Hope this helps The drum needs to be cleaned. Instructions available here: ...

...drum to the printer is ok, after returning the drum to the printer turn off your printer remove the power plug from the wall outlet and same also at the back of the printer. after five minutes power ...

...drum in printer. So resets the drum carefully inside the printer after clean it. Then reboot the printer and the system both. If it doesn't solve your problem then change the toner. It may help ...

replaced drum but printer still says replace drum Replaced the drum, printer still says replace drum and print quality has not improved. go here to download your own manual

printer or the drum/toner unit may cause the grinding or clicking noise. Power off the printer and open the front cover. Remove the drum/toner unit and close the front cover. Power the printer back on