Questions & Answers for: The printer drum

THE DRUM CANT OPEN musical drum, oil drum, printer drum. Please state make and model or at least what it is.

...and there are no lights for the paper, drum or toner. Printer is HL-5370. One-side printing still possible with squeaky sound, double-sided gets jammed you'd like to have it certified-tech

...Printer needs clean inside. ... if you change the toner other one or duplicate which is not use from your side regular, then you have to clean DP unit remove all toner and add new toner (NPGI51) also ...

...drum and the printer cartridge but it still says drum error Hello for replaceing drum in brother printer you must turn on your printer and open its door ,then you press clear key on its panel and you ...

...Drum Cartridge from the printer. Locate the black gear attached to the end of the Drum and turn it using your fingers. Check whether the gear is locked, else it is difficult to turn. The gear rotates ...

...Printer Drum? It is the metal roller that gets etched with the image of your print job by a laser. As the drum gets charged by a laser though it doesn't make a nice sound when struck, the laser ...

...motor and pump are okay . What is the reason for itt not transporting in the drum The drum may be defective. Try another cartridge. If the problem is still present, Contact your printer ...

...drum is damaged, you will need to replace it. 2. Scanning Lamp Turns On: This is normal and indicates that the printer is ready to scan. 3. What Could Be The Cause?: There could be several causes for ...

drum unit from the printer and carefully inspect it for any visible damage, such as scratches or cracks. Make sure that the drum is not damaged, and also make sure that it is not dirty. if it is dirty

printer. To remove the drum, follow these steps: Turn off the printer and unplug it from the power source. Open the front cover of the printer. Release the blue lever to unlock the drum unit. Hold the