Questions & Answers for: Konica Minolta printer drum

...drum and is it worth it to change it out or should we just buy a new printer? yes it worth change especially if its a laser printer. open front cover remove toner waste bottle there is large silver ...

...PRINTER. The back right of the drum has a small 20mm F80mA fuse that you need to replace to reset the drum counter. (fuse blows to reset the drum life setting) Try upgrading a firmware, Else contact ...

...drum. Printer is Magicolor 2300DL Is there a way to remove the drum and safely remove the labels, clean drum so it works again or do I need the repair shop pronto. If so where is the closest repair ...

printer.I would appreciate you help.Thank you. Diane Hey, Try installing the toner/pc drum once more, then print something and when printing open first cover and take out pc drum, look the pc drum, if

...until I have problems? (Is this a mistake, am I causing unnecessary wear and tear on the printer?) When I put in the old drum the printer still thinks it's the new one, so I've got full life

...printer indicates the second drum needs to be replaced. Most printing is B/W. Problem showed up after moving to Vista 64x; I'm using 64x drivers from KM. - Lj Go to the link below, you'll find the ...

...drum and toner and printer still will not work Printer stopped working and it was assumed that the drum needed replacing however after replacing drum it still doesn.,t work If you refilled the drum, ...

...printer displays Drum Low Replaced black toner cartridge now printer displays Drum Low Minolta Konica magicolor 2300 DL The drum and the black printer cartridge are two separate items. You will have ...

...printer when paper is in drum area (guess and open a door or turn off, to stop the printer) open carefully, remove carefully and look at the paper, are the lines there, pull drum unit, flip open drum ...

...printer. The drum unit should click into place when it is properly installed. Check the drum unit's sensor for any debris or buildup that may be blocking it. Clean the sensor with a soft, dry cloth. ...