Questions & Answers for: pride mobility speed pot error

...mobility scooter that keeps cutting out and stopping dead, i then switch it off and on and it starts, could it be the motor? My Pride Colt XL8 keeped cutting out (7 flashes of LED, Speed pot error) , ...

will not go very fast about half speed speed pot error ? batery is not charged all the way If the battery is charged fully, check the speed knob on the steering console. It is probably turned too low.

...speed pot error". How do I fix that? You will more than likely need a new speed pot but some are connected to the throttle pot as well so it could be that which is at fault. Could also be wiring or ...

speed pot not being changed but not forward. when you are just changing the position of the throttle to forward thereby changing the pot wiper and getting the error. Contact Pride about the problem at

has 6 beep 6 Bleeps on a Go-Go indicates you have a speed or throttle pot error.

...Brake lever in freewheel mode 6. Throttle lever not in centre on switch on or faulty 7. Speed pot or throttle pot error 8. Motor volts error 9. Other internal fault/control fault Hope that helps

How do you change the Speed pot on xl8? I get 7 flashes as the error code on my xl8 mechanic is the solution

...x i turn key on led lights but as soon as you touch throttle it flash code 7 and does not move Hi code 7 is a speed pot error CONTACT A PRIDE DEALER. www.pridemobility.com. or call (877)706-2032 ...

...Pride Travel Mobility Scooters and get a Speed Pot error. Where do I buy a Speed Pot with Harness for Go-Go & Pride Travel Mobility Scooters in Canada? Hi try MONSTER SCOOTER PARTS PHONE ...

...) possible speed control pot ::: wig-wag. control lever ,is ,faulty or it's possible the computer (CONTROL BOX ,) is Faulty...Get in touch with pride mobility ,..www.pridemobility.com.au .. ...