Questions & Answers for: previa head gasket

...head gasket on my l reg 2.4 petrol previa ive tried to start it but it is misfiring can anyone help please It sounds like the rotor button is not making a good connetion. i recommend replacing the ...

...Previa van, replace head gasket The toyota previa uses a formed silicone gasket for the valve cover and the cover is held in place by metric shoulder bolts ( 10mm). The valve gasket leaks because you ...

...PREVIA 94 SUPER CHARGE I HAVE CHANGE WATER PUMP I TOOK THE THERMOSTAT OUT CHANGE NEW HEAD & GASKET AND STILL HEATINHG ANY ONE VAN HELP The radiator or heater core might be plugged up, most likely ...

...previa over heating over heating and spewing out coolant, could it be the thermostat? It could be the thermostat replac eto be sure but also check to make sure the cooling fan is coming on ...

previa was smoking but went away then after 40 miles the temp went up,so I had it towwed to shop. He told me the engine siezed. Went to pick it up and started it then drove home. when I checked oil it

My previa loses antifreeze and it emits smoke or vapor from exhaust You have either a blown head gasket or a cracked block or head.

previa 2 cylinders no compresion There is in most cases only one reason for this and that is that the engine cylinder head gasket is leaking between the 2 cylinders.

changed the head gasket and it doesnt start i changed the head gasket on my toyota previa and it doesnt start Did you get the timing marks in the right place? All wires plugged in?

2TZ toyota engine? 2.4 petrol, 1990 I need to find the actual serial number of the engine in my toyota previa, estima, emina 2TZ 2.4 petrol It should be stamped on the block just under the head gasket

...Previa head gasket. - ToyotaVanTech www.toyotavantech.com > Forum > Technical Discussion > Toyota Previas Dec 3, 2011 - 20 posts - ?2 authors Okay, so you've got a Toyota Previa with a blown head ...