Questions & Answers for: pressure washer wand stuck open

...pressure washer which has started to dump pressure before it comes up to pressure. If I slowly adjust the pressure control it comes to about 40 bar and dumps. I have stripped the pump to check for ...

...pressure washer. The unit surges when I put the wand on and then it stops working. I tried cleaning the wand (didn't make any difference) I then tried another wand from my son's unit (still didn't ...

...Pressure Washer. The burner is not working. Once I get the machine running and water flowing to the pressure washer, with the wand pressed, I flip the burner on switch....and nothing...I have no idea ...

Pressure washer leaks when wand trigger is actuated and has very low pressure/flow output. After releasing trigger the pressure cycles on - off at approx 1 second interval. I suspect that the plasstic

...washer runs until I connect the feed hose than it stops immediately - any ideas?? Dear Davidandkath, I am assuming that by feed hose you mean the water supply inlet. Well if you connect the water ...

...wand is released. When the trigger is released, pressure builds up and this acts on a valve (spill valve or pressure control valve). When this pressure is big enough it will push the spill valve out ...

...PRESSURE FROM WAND, WATER COMES OUT FINE BUT NO PRESSURE Check the unloader valve. This valve is designed to open when you release the trigger so the pressure doesn't damage the pump. If it gets ...

pressure washer will not start. I have a 6.75 hp pressure washer that is only a year old. when I pull cord it turns over but does not start. I changed plug and checked it, I have spark when pulling. I

...pressure wand the engine runs fine as soon as pressure builds (stop spraying) engine stalls the pump has an unloader valve it has a check valve at the high pressure output port where you connect your ...

pressure washer runs but no pressure! My Brute 2500 pressure washer runs fine but no pressure. After a minute, water comes out of a black plastic nozzle on the pump. Tried a new wand but nothing?!?! I