Questions & Answers for: pressure washer turns nozzle

pressure washer has no pressure i have a simonz sph-2000 pressure washer. it doesnt have much more pressure coming from the nozzle than a regular water hose nozzle. motor turns and regualtor turns off

...washer does not let the soap come out when you turn the soap control on You have to use the SOAP nozzle (Black Tip) It is a low pressure nozzle. The venturi effect prevents the psiphon under high ...

...do I remove. Very FRUSTRATING PUSH IN TURN LEFT AND WHEN IT STOPS PULL OUT. I just see an image no description, your talking about a kercher pressure washer I hope. Hope this helps let me know ! ...

...pressure hose and now the washer will not turn on. If I remove the unit from the water hose, it works, but when I hook everything back up, it doesn't. This sounds like the hose is plugged or the ...

...pressure washer. Check that all hoses are free of kinks, leaks, or blockage. Make certain all hoses and fittings are connected properly. Make sure to open the faucet/spigot to full force. Set the ...

...pressure washer 2700 psi no pressure Water comes out the nozzle, but low pressure? ( more than when the motor is not running) I would check the check valves and the unloader. If the amount of water ...

How to widen nozzle spray width? Yesterday the nozzle spray width was twice as large as today. Nozzle was put on in exactly the same way. No amount of turning the nozzle is changing the width of the ...

...pressure washer works fine. If I attach a turbo nozzle the pressure hose will burst. Turbo heads are pressure rated for different pressure washers, your turbo head is most likely rated bellow the ...

Deere pressure washer and it only discharge chemical when I turn on the water and remove nozzle from hose with motor not running? To discharge chemical you have to use the low pressure cleaning nozzle

...pressure washer be surging ? blockage in the wand nozzle jet Clear any debris from the nozzle. If the nozzle has even a little bit of dirt in the tip, it may cause enough obstruction for the pressure ...