Questions & Answers for: pressure washer hose split

Question about WF203ANW Front Load Washer

4 Answers

...pressure. Unplug washer, disassemble hoses from valves, disassemble valves from the washer (screwdriver needed), drill both holes in red restrictor to 1 mm (use 1 mm drill or just big needle). ...

Ad

Question about WF203ANW Front Load Washer

1 Answer

...washer when it gets full. I know this is a pressure switch. How do I diagnose the problem? Thanks for your help. not always the pressure switch itself. years since i saw one of these machines so just ...

Ad

Question about 2500 PSI Pressure Washer

1 Answer

...pressure washer Hello, I'm having trouble with my Honda Pressure washer. I connected up the hose, trigger and water hose. Turned on the pressure washer, then pulled the trigger and started it up. ...

...pressure washer and the gas is leaking out help Have a 2 yr old troy built pressure washer 2550 have only used twice...the first two times the hose split right open...just got another new hose and ...

Question about 2500 PSI Pressure Washer

2 Answers

...pressure hose has split. can anyone tell me where I can get a replacement. Thank you. I believe this link will take you to contact info for ordering parts directly. www.aussiepumps.com.au Not sure ...

Question about 22422 Top Load Washer

1 Answer

...washer to overflow, Check the small air hose on the pressure switch inside the operator console. The following link explains: http://www.fixya.com/support/r3575901-washer_overflows The hose can ...

Question about PSI Electric Pressure Washer

1 Answer

...going to your karcher is not obstructed from its path. on mine i bought a goodyear hose that can be purchased at northern tools or any hardware store. and use it just for pressure washing. good

...washer is displaying an f8e1 code and stops part way through the filling cycle. I have checked the obvious stuff but I noticed that the pressure switch is leaking some where along the small hose from ...

Question about 360 Head W/Hose

1 Answer

polaris 360 hose splitting new hose splits after one week THere must be a problem with the quality of the plastic on the hose! Try to get some satisfaction from the dealer who sold it to you. If not, ...

Question about Black Max 2600 PSI Pressure Washer

1 Answer

suds won't draw from tank suds will not flow to the wand anymore.Nothing seems stopped upat the tank end. make sure the hose from the tank is not split or cracked where it draws from the tank

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...