Questions & Answers for: pressure washer gun wont shut

...pressure washer with honda gcv160 engine. seems to run well, but when trigger is pulled get full pressure for less than 5 seconds before reducing to house water pressure. when left running, looks a ...

...pressure washer turns on sounds normal, but when you pull the trigger there is no way near enough pressure to do anything..The gun and H/p hose is brand new..Any ideas? It is probably air ...

...WASHER SOUNDS FIND BUT WHEN I PULL THE TRIGER ON THE GUN NO WATER COMES OUT. WHEN I SHUT IT OFF AND RELEASE THE WATER IT COMES OUT BUT NO PRESSER IN THE GUN .PLEASE HELP ONLY 1 YEAR OLD. Nozzle is ...

...the pressure adjusting relief valve or remove it, and disassemble it and clean it. what type of oil do honda troy-bilt pressure washer psi 3000 need? oil for the troybilt 3000 psi is 4 cycle sae ...

pressure washer gun "freezes up" OVERPRESSURE, and trigger will not release water. If you allow the hose and gun to cool down in the shade then the pressure seems to go down and then the gun is usable

...pressure washer? Pump should be half full of SAE20 or SAE30 non-detergent motor oil. Engine should have 10W30 motor oil. If you have a pressure washer ... and not water is coming out end of gun: Take ...

...Finally, the gun trigger may be bad. We had to buy guns now and then. Search for pressure washer guns Following link shows guns we used: ...

pressure washer power boss 3000. I load the gasoline, start the machine, but pressure water is not coming out from the trigger. i tried so many things , but can t get started. Hi!! Some guns get stuck

...available in Image not available Amazon com Powerwasher 80012 Universal Electric Pressure Washer... www.ppe-pressure-washer-parts.com/task-force-tf2000-1st-pressure-was. They still offer some

...gun are pressurized the couplings should not be able to be dis-connected. The pressure should be released first by shutting the motor off and then squeezing the trigger to allow the water to drain. ...