Questions & Answers for: pressure switch clicks rapidly

...pressure switch detects either water or suds, it commands the drain pump to continue. After 8 or so minutes, if it's still detecting water or suds, the F02 error is displayed. I performed the ...

...pressure switch detects either water or suds, it commands the drain pump to continue. After 8 or so minutes, if it's still detecting water or suds, the F02 error is displayed. I performed the ...

pressure switch. if there is a hole or a crack or anything loose on the connection. if the pressure won't build up on the water level switch, it wont transfer the contacts to start agitating. test the

...pressure switch detects either water or suds, it commands the drain pump to continue. After 8 or so minutes, if it's still detecting water or suds, the F02 error is displayed. I performed the ...

...pressure switch hits cut out settings to prevent compresser damage,hence the pressure drop, once the pressure comes back up on the suction side, compresser is engaged again and cuts out, this happens ...

...pressure switch detects either water or suds, it commands the drain pump to continue. After 8 or so minutes, if it's still detecting water or suds, the F02 error is displayed. try the following : 1. ...

The pressure switch clicks on & off rapidly (every second) when it approaches shut off, and then trips off. the switch has failed.

...on there is a click but heater does not light. Sometimes several clicks in rapid fire. Other times a single click. Burner does not come on. sounnds like low pressure at pressure switch or loose ...

pressure switch clicks on and off rapidly when it first comes on I have it set to 30/50 and I have 28lbs of air in the tank It seems the pressure switch needs replacing due to fatigue. Pressure switch

...pressure switch for good measure. The furnace would run the cycle as normal and when it was time for the gas valve to provide supply the valve clicks 7-8 times rapidly and ignites. It will run for ...